ZKTeco DS10 Manual De Instrucciones página 6

Step 2: Power on the Device
1. Push the mounting plate downward, and then
separate the mounting plate.
2. Insert the provided two LR03(AAA) batteries to
power on the device.
3.
Press and hold the Reset Button for 5 seconds
until the blue LED light begins to blink
rapidly, indicating that the Pairing Mode is
active.
Step 3: Add the Device to the App
1.
Enable Bluetooth and Wi-Fi permissions on
your smartphone.
2. Open the app, tap the "+" button on the top
right corner of the interface, and then select the
"Add Device" option.
3.
Tap the "Add" button once the device has
appeared. Follow the on-screen prompts to pair
the device automatically.
4. You can manually change the name of the
d e v i c e o n c e t h e n o t i fi c a t i o n " A d d e d
successfully"displayed on the mobile app. To
finish the process, tap the "Done" button.
Note: If you have failed to connect your device to
Wi-Fi, press and hold the Reset Button for 5 seconds
until the LED light begins to flash blue, then
repeat the above steps.
5