ZKTeco DS10 Manual De Instrucciones página 8

Installation
Installation Location
The device can be mounted on the windows, doors,
drawers, and other surfaces. The main unit should
be installed on the door/window frame, and the
magnet should be mounted on the door/window.
Installation Steps
Af ter the confir mation of a successful Wi-Fi
connection and normal working status, you can
select the required position to mount on the
device. The installation steps are as follows:
1. Remove the protective film from the bottom of
the device.
2. Place the device on the edge of a door or a
window.
Important Notes:
the main unit and the magnet is less than
10mm when the door or window ,
Make sure the gap between
7
is closed.