EFALOCK Professional LUMYNA Instrucciones De Uso página 12

Button lock/locking function:
This is used to lock the buttons in the hairdryer application during an operating
process.
CLEANING, CARE & STORAGE
▷ Switch off the device and disconnect it from the power supply before
maintenance. Clean only when cooled down!
Regular filter cleaning:
▷ ATTENTION: The high performance motor is protected by the air inlet filter. It is
therefore essential to clean the filter after 3 days in intensive salon use. Only
in this way the motor is protected, a correct function of the device is maintained
and a long service life can be guaranteed. The accumulation of dirt due to improper
cleaning of the filter can cause damage to the motor!
automatic cleaning function:
This hair dryer has an automatic cleaning function for cleaning the internal
components.
▷ This function is only active once when the power is on. If you want to activate
this function again, please disconnect the power cable and plug it in again. Now
you can perform cleaning again.
14102529_LUMYNA_IM.indd 12 14102529_LUMYNA_IM.indd 12
Locking mode: If the buttons are not pressed for 3 seconds,
they are locked. Temperature and blower settings cannot be
adjusted accidentally.
Unlock mode: By double-clicking the ON/OFF button
(locking symbol), the buttons are unlocked again and the
temperature and fan can be adjusted.the display flashes in
unlock mode.
After a usage time of 20 h, the 888 lights up in the display.
This indicates that the filter must be cleaned immediately.
ENGLISH
1. turn off the hair dryer.
2. press and hold the speed
button for 3 seconds.
The motor then switches the
fan in the reverse direction for 7
seconds.
11.06.24 12:00 11.06.24 12:00