Figure 11-Turn onthepressure washer
bydepressing
thetophalf o ftheswitch
(L)marked 'T'.The unit w illrunforafew
seconds asitbuilds uppressure, then wilt
shut o ff.Itwilt r unondemand asthegun
trigger i sdepressed. Turn offthepressure
washer bydepressing thelower h alf o f
theswitch marked "0".
damage andallows f orcleaning large
surface a reas q uickly.
3.)Toremove, press f anwand intogun
wand andtwist a sshown i nFigure C.
YOUR PRESSURE WASHER IS NOW
READY TO USE - PLEASE REVIEW
THE FOLLOWING
FOR DETAILS ON
ACCESSORIES
APPLICATION.
z_CAUTION:
Before changing
accessories,
turn unit off, pull trigger
to release pressure, and activate
safety catch.
• ADJUSTABLE
FAN WAND
1.) Insert the fan wand (D) into the gun
wand (H) by pushing and rotating until the
two parts are locked as shown in Figure
A.
2.) To obtain maximum pressure, rotate
the fan wand nozzle in a clockwise
direction as shown in Figure B. This
narrow stream results in deeper cleaning
in a concentrated
area. For a wider fan
pattern rotate the fan wand nozzle in the
counterclockwise
direction.
The wider fan
pattern reduces the risk of surface
• TURBO NOZZLE
1.) Insert the turbo nozzle wand (C) into
the gun wand (H) by pushing and
rotating until the two parts are locked as
shown in Figure D.
O
2.) There is no adjustment required with
the turbo nozzle.
3.) To remove, press nozzle wand into
gun wand and twist as shown in Figure
E.
• DETERGENT
APPLICATOR
Follow manufacturer's
label directions for
mixing correct concentrations
of soap
and detergents.
To use the applicator:
1.) Unscrew top of detergent applicator