Globe SAVANNAH Instrucciones De Montaje E Instalación página 13

INSTALLATION
6. Attach the canopies
Loosen the two mounting bracket screws (SS) on the mounting bracket (A) and attach the
6.1
canopy (B) to the mounting bracket (A) by aligning screws to keyholes and twisting; then
tighten the mounting bracket screws (SS).
Note: Ensure the yellow antenna from the receiver is tucked into the canopy.
A
SS
B
Align the canopy ring (C) with canopy (B) and push up the canopy ring (C) until the
6.2
mounting bracket screws (SS) heads engage in the slots with arrows, then rotate the
canopy ring (C) clockwise until tight.
SS
B
C
B
C
13