COMPACT ECO SERIE
TECHNICAL INFORMATION
1.1 General Information
COMPACT ECO SERIES is an easy-to-use three to phase industrial inverter MIG/MAG welding machine
designed for heavy conditions. It provides fast and easy use with its user-friendly interface. It offers excellent
welding characteristics with all solid and flux-cored wires. Welding voltage, wire feed speed can be adjusted
from the panel in front of the wire feeder.
Welding voltage and current can be monitored through a digital display. Optimal welding parameters can be
selected from the table located inside the wire feeding unit. There is an integrated gas cylinder platform and
a 24 V electrical socket for the CO2 gas heater. It is cooled by a fan and has protection against overheating.
1.2 Machine Components
1
2
3
4
5
www.magmaweld.com
6
7
8
9
1- Left Digital Display
Figure 1 : ID 250 - 350 MK ECO Front and Rear View
2- Adjustment Pot
3- Torch Connection
4- Pole Connection (-)
5- Torch Pole Connection
6- Right Digital Display
7- Adjustment Pot
8- On / Off Switch
10
11
12
9- Pole Connection (+)
10- Gas Inlet
11- Heater Socket Socket
12- Water Unit Energy Socket
13- Mains Cable
14- Canister Wire Input
15- Fan
16- Wheel
Technical Information
11
13
14
15
16
USER MANUAL
EN