Installation Kit
COLOR TUBING
JGV-ASVPP1LF
DS-EZW4
INS-TEFLON
JGV-PPSV500822W
PNTK-150539
JGF-PP3208U7W
4
1. Color Coded Tubing: ( 4 coils, 4 colors)
¼'' Green Tubing (approximately 6 feet)
¼'' Red Tubing (approximately 6 feet)
¼'' Yellow Tubing (approximately 6 feet)
¼'' Blue Tubing (approximately 6 feet)
Optional 5th coil is added for air gap installations
3/8'' Red Tubing (approximately 6 feet)
Note: The color coded tubing matches
the color coded plugs on the Proline® RO system.
2. JGV-ASVPP1LF (Angled Stop Valve) is used for connecting into cold
water supply in between the top of basin supply angle valve and the
flex line that connects to the cold water sink faucet.
4. DS-EZW4 (Drain Saddle) used for tapping into drain line when
standard faucet is used.
DS-EZW6 (Drain Saddle) used for tapping into drain line when air gap
faucet is used.
5. Teflon Tape: Used on all threaded fittings to prevent water leakage.
Eight rotations (layers) are adequate when using Teflon tape to
secure any threaded fittings. The Proline® RO already has Teflon tape
on all of
its fittings.
6. JGV-PPSV500822W: (Storage Tank Ball Valve Quick Connect 1/4'').
In normal operation, the Storage Tank Ball Valve must be in the
"open" position. Add 8 layers of Teflon tape on top of the threaded
tank outlet. Screw tank ball valve securely on threaded 1/4" NPT
port. Connect yellow tubing from it to post filter tee.
8. PNTK-150539: (White Wrench) Make sure the black rubber o-ring is
properly in place in the filter housing after changing filters following
any maintenance.
9. JGF-PP3208U7W: (Faucet Connector) to connect the faucet with
blue 1/4'' tubing coming from the post filter labeled to faucet.