Triton Blue TR-HAZER-1000 Manual De Usuario página 10

CONTROL
When you first turn on the Haze machine you show wait for around 2
minutes while the unit warms up. When completed you will have access to
various options if the wired remote control is not connected.
Press menu to scroll through the various options listed below. Use the up
and down keys to set the secondary function.
d001- d512
F (Fan Speed) and h (Haze Output) are settings for continuous stand-alone operation and will override any remote control
of the haze machine
DMX CHANNELS
DMX CHANNEL
CANNEL 1
CANNEl 2
TIMER CONTROLLER
The timer controller can be used to control this haze machine remotely.
Please note Fan speed (F) and Haze output (h) must be set to zero for the remote timer controller to operate.
10.
Display
h 0-5
F 0-5
Flash
Function
0%-100% Fan speed
0%-100% Haze output
User Manual | TR-HAZER-1000 by Triton Blue | January 2024 | www.triton-blue.com | Exclusive Professional Use
Function
DMX Address
Manual haze output 0=off, 1=low,5=high
Manual fan speed 1=slow, 5=high
Fluid running out protection, please add fluid !
0~255 de menos a mas
0~255 de menos a mas
8
9
7
6
5
4
1 2 3
MENU UP DOWN
DMX VAlue