Triton Blue TR-HAZER-1000 Manual De Usuario página 9

• The power cord should always be in perfect condition. Switch the unit immediately off when the
power cord is squashed or damaged. It must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• Never let the power-cord come into contact with other cables!
• This unit must be earthed in order comply with safety regulations. In order to prevent electric shock,
do not open the cover.
• Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
• In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
• The housing must be replaced if they are visibly damaged.
• Please use the original packing when the device is to be transported.
• Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
DESCRIPTION
1
2
3
1: FLUID TANK: Make sure the fog fluid container is never empty during operation; This will damage the pump of the
machine.
2: BRACKET: Made of steel for easy installation
3: FIXING SCREWS: Using these screws, the supplied lyre is fixed and adjusted
4: OUTLET ADJUSTMENT PART: Using this moving piece you can direct the smoke outlet
5: SMOKE OUTLET NOZZLE
6: DISPLAY: To control machine parameters
7:REMOTE CONTROL CONNECTOR
8: DMX INPUT and OUTPUT: DMX signal input and output through 3 connectors
9: SWITCH: Turning the machine on and off
User Manual | TR-HAZER-1000 by Triton Blue | January 2024 | www.triton-blue.com | Exclusive Professional Use
4
5
7
8
9
6
TR-HAZER-1000
9.