Publicidad
Idiomas disponibles
Idiomas disponibles
Tool Weight
(with battery 2.0Ah)
WARNING
− that the vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used; and
− of the need to identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time).
Charger Model Number DC12US07- C15
Battery Pack Model Number
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery release button (see Fig. 2A), and
pull battery pack out of tool.
TO INSTALL BATTERY PACK: Align rails (see Fig. 2B), on the tool with the four
tabs on the battery pack, and push battery pack onto tool until it locks in place.
B
A
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (see Fig.3).
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
1English1
lbs/kg
Input
Output
Output Amps
Input Power
Type
ASSEMBLY
Fig. 2
English
3.08 / 1.4
100-240 ~Vac,
50~60Hz
12.6 Vdc
1.5 A
30W
B1225LB, B1225LB-2
Li-ion
-7
DC12US07-40
100-120 ~Vac,
50~60Hz
4.0A
60W
Publicidad
