Ceado Life X Manual De Uso Y Mantenimiento página 45

GB
Cleaning the grinding chamber
To remove oily residues from the coffee and
avoid premature wear of the burrs (with
consequent variation in the dose of the ground
coffee), it is recommended to frequently clean
the grinding chamber using the special
GRINDZ™ coffee grinder cleaner or other
similar products.
Cleaning the other components
At the end of each working day, clean the
outer surfaces dirty with coffee (motor housing,
discharge opening, single dosing kit etc.). Clean
the appliance completely at least once a week.
Always disconnect the plug of the
appliance from the power socket
before cleaning it.
Clean the motor housing with a cloth
dampened with water or alcohol.
Wipe with a dry cloth.
Never put
running water and never immerse in
water.
Once the hopper has been removed it can be washed with lukewarm water and neutral soap,
then rinse it and dry well.
- Use a brush or a paintbrush (Fig. 18) to clean the most hidden areas inside the unit and a dry
cloth for the other surfaces.
MAINTENANCE
Maintenance must be carried out exclusively by qualified technical personnel.
Care for the mechanical and electrical parts of the appliance is indispensable in order to guarantee
their safety and efficiency. If any parts need replaced, authentic spare parts must always be used.
TROUBLESHOOTING
(See Table on the next page)
In case of any malfunction, defect of the appliance or if you suspect any breakage after a fall, unplug
the appliance immediately.
the appliance under
45
Fig. 18