Ortovox LiTRIC Manual Del Usuario página 51

4.5.2. What to do in case of an
avalanche
Familiarize yourself with the correct
procedures in the event of an avalanche.
In principle, the following general advice
applies:
In an avalanche, always try to escape and
get to safety as fast as possible. Leave the
LiTRIC® airbag (B) inflated and on your
body until all potential danger from the
avalanche has passed and you are safely
out of the danger zone.
ATTENTION
The LiTRIC® Avalanche Airbag must be sent in for a service inspection
(see point 5.3) after it has been deployed and inflated in an avalanche.
4.6. AFTER DEPLOYMENT
4.6.1. Deflation
In order to prepare the LiTRIC® Avalanche
Airbag for another deployment, you must
first deflate the LiTRIC® airbag using the
airbag deflation tool (Q).
Push the airbag deflation tool into the
special air release valve on the LiTRIC®
fan unit (A). Now the air can escape the
airbag. Leave the airbag deflation tool in
the fan unit until the LiTRIC® airbag is
packed away, and then remove it.
50
Deflation
ATTENTION
Use only the original airbag deflation tool to
deflate the LiTRIC® airbag. Never put any
other items or tools into the LiTRIC® System
air release valve.