Blackstone 2140EU Manual Del Propietário página 5

Model: 2140eU
ASSeMBlY INSTRUCTIoNS
Find a large, clean area to assemble your appliance�
Remove all packing material before assembling�
Sharp edges. Wear gloves while assembling.
Place the griddle body upside down on a smooth flat
STEP 01
surface� Thread the four (4) griddle feet into the bottom of the griddle�
Install the two (2) control knobs by pushing them into place
STEP 03
in the oFF position�
BLACKSTONEPRODUCTS.COM/SUPPORT SUPPORT BLACKSTONE EUROPE.COM
CAUTIoN
ASSEMBLY GUIDE
Set the griddle on its feet� Place the griddle top onto the
STEP 02
griddle body by aligning the four pins to the holes of the body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
Hang the grease cup in the slot on the back of the
STEP 04
griddle body�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
| OWNER'S MANUAL
ELECTRIC REQUIREMENTS:
120V 60Hz
NOT INCLUDED (OPTIONAL):
Two (2) d batteries
Mak
seat
the
the
Mak
seat
the
❶ ❶ P
the
the
❷ ❷ T
into
05