Techmade TM-GLOW Manual Del Usuario página 28

INSTRUCTION
1. Charging instructions
Charge the device before use.
To recharge the device, insert the USB port into a
charger (5V 1A) or PC and place
the smartwatch correctly on the
charging base.
I notify:
1) Use the charger only on a flat and
stable surface.
2) If there is an obstacle between the smartwatch and
the charging cable, the smartwatch may not charge
properly.
3) After charging the smartwatch, disconnect the power
(do not leave the device charging for whole nights). To
avoid damaging the device, use only the supplied cable.
4) Do not use if the charging device is damaged.
5) Disconnect the charging device when cleaning the
smartwatch, during a thunderstorm or during a
prolonged period of non-use.
6) Do not attempt to disassemble or modify the
smartwatch
and charging cable.
-27-