Publicidad
Idiomas disponibles
Idiomas disponibles
USING AS BEDSIDE COMMODE
1.
Set commode to desired height (described in previous steps).
2.
Lift commode seat and lid and place Commode pail onto pail supports.
Ensure that pail is properly positioned below commode opening.
3.
Place commode seat down. Commode is now ready for use.
4.
When user is finished using commode, place commode pail lid over
commode pail to contain odors.
5.
Remove pail and lid simultaneously to empty pail. Clean seat and pail
with disinfectant after each use.
ARM ADJUSTMENT
•
Drop Armrest: to drop the armrest, push the release lever inwards to
release the armrest. This releases the armrest allowing for the transfer
on and off the commode.
•
Raise Armrest: to raise the armrest, lift the armrest to the upright
position, ensuring that the push button protrudes fully from locking hole.
WARNING
ADVERTENCIA
GF1500042RevA15
Figure 1
Armrest
Seat
Frame
Commode Pail
Lid
Back
Support
Height
Adjustment
Holes
Tip
Publicidad
