Publicidad
Idiomas disponibles
Idiomas disponibles
ET1205 Manual
7/18/00
10:25 AM
require no lubrication.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your local service center.
If you need assistance in locating any accessory, please contact
Snap-on Tools Corporation, Kenosha, WI, 53141.
CAUTION: The use of any other accessory might be hazardous.)
For safety in use, the following accessories should be used only in
sizes up to the maximums shown in the table below.
Maximum Recommended Capacities
DRILL CAPACITY
R.P.M.
BITS, METAL DRILLING
WOOD, FLAT BORING
BITS, MASONRY DRILLING
HOLE SAWS
ACCESSORY MUST BE RATED FOR USE AT SPEED EQUAL TO
OR HIGHER THAN NAMEPLATE R.P.M. OF TOOL WITH WHICH IT
IS BEING USED.
WIRE WHEEL BRUSHES
WIRE CUP BRUSHES
BUFFING WHEELS
RUBBER BACKING PADS
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
Page 5
3/8"
0-2500
3/8"
1"
1/2"
1-1/8"
4" Diameter Maximum
3" Diameter Maximum
3" Diameter Maximum
4-5/8" Diameter Maximum
organizations, always using identical replacement parts.
Full Warranty
Snap-on heavy duty industrial tools are warranted for one year from
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. This warranty does not apply to
accessories or damage caused where repairs have been made or
attempted by others. This warranty gives you specific legal rights and
you may have other rights which vary in certain states or provinces.
In addition to the warranty, Snap-on tools are covered by our:
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your Snap-
on heavy duty industrial tool, simply return it to the participating seller
within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
5
Publicidad
