Whisk
Cold frothing
Hot frothing
Heating
1.Hot frothing: use the whisk with spring
red indicator light will light up to show that the unit is in operation.
2.Heating milk: use the whisk without spring
start. The red indicator light will light up to show that the unit is in operation.
3.Cold frothing: use the whisk with spring
start.The blue indicator light will light up to show that the unit is in operation.
CAUTIONS
1.At least 3 minutes rest time must be maintained between two continuous cycles.
Otherwise, the frother will enter self-protection condition automatically after
working for 5 cycles continuously. The working indicator will flash and the switch
button will not be activated. After about 5 minutes of cooling down, the frother will
enter standby state and you can continue to operate it.
2. Please clean the frother according to the section "CLEANING AND MAINTE-
NANCE" after using.
SPECIFICATION
Rated Voltage: 220V-240V
Rated Power: 450W-550W
Frothing Capacity: 150ml(max)
Function
Min capacity
75ml
75ml
75ml
Max. capacity
150ml
150ml
300ml
, press the
,press the
, press the
Rated Frequency: 50/60HZ
N.W./G.W.: 800g/1000g
Protection Class: I
Product Capacity:300ml
-EN.05-
Time(approx)
Temperature
Current
60~180s
temperature
of milk
60-180S
60±5
60-240S
60±5
hot button to start. The
hot button to
cold button to