INKBIRD ITH-20R Manual página 13

Monitor, when synchronizing, try to make the
wireless remote sensor close to the Temperature
and Humidity Monitor. The Temperature and
Humidity Monitor and the wireless remote sensor
can be synchronized within 2 minutes after the
wireless remote sensor is re-powered on
(Re-install the battery).
Synchronization and reset of
04
Temperature and Humidity Monitor
and wireless remote sensor
4.1.Synchronization
A. The first step is to correctly install the
battery of the Temperature and Humidity Monitor
to power on.
B. After Temperature and Humidity Monitor is
powered on, then please install battery correctly
for wireless remote sensor power on, and try to
close the wireless remote sensor to the
Temperature and Humidity Monitor. (Note: When
10