INKBIRD ITH-20R Manual página 15

sensor is recorded sensor (After the
Temperature
and Humidity Monitor is powered off and restarted, it
is not necessary to re-synchronize with the wireless
remote sensor). When the red light of the wireless
remote sensor flashes once, it indicates that the data
is successfully transmitted once, and when the RF
signal icon of the corresponding channel of the
wireless remote sensor is light (lighting for 5s), it
means the Temperature and Humidity Monitor
successfully receives the data once and updates the
current temperature and humidity in real time.
4.2.Reset synchronization
● Press and hold the TX button (5s) of wireless
remote sensor to reset the synchronization
between the wireless remote sensor and the
Temperature and Humidity Monitor. If you need
to re-synchronize, follow the above steps A~D to
synchronize.
● Press and hold the CH/R button (5s) of
Temperature and Humidity Monitor to reset the
synchronization between the Temperature and
Humidity Monitor and all the wireless remote
12