HAUNTED LIVING 61094 Manual De Instrucciones página 3

ASSEMBLY INSTRUCTIONS
1. Insert and snap lock the LEG POLES WITH
CONTROL BOX into the METAL BASE.
(Match A to A), (Match B to B)
(Match C to C)
2. With the front of the TOMBSTONE facing the
FRONT label of the METAL BASE, slide the
TOMBSTONE down onto the right LEG POLE.
3. Slide the longer end of the FOAM TUBE over
the right LEG POLE. Slide the other half over
the WAIST FRAME's pole labeled D. Insert and
snap lock the WAIST FRAME to the
LEG POLES.
(Match D to D), (Match E to E)
(Match F to F)
1
2
3
5
ASSEMBLY INSTRUCTIONS
4. Insert the SPINE POLE into the WAIST FRAME.
(Match G to G)
5. Insert the poles on the BACK WIRE FRAME into
the holes located on the SPINE POLE.
(Match Yellow to Yellow), (Match Blue to Blue)
6. Insert and snap lock the HEAD, BODY &
HANDS to the SPINE POLE.
(Match H to H)
4
5
6
6