Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING/BLUETOOTH PAIRING INSTRUCTIONS
ON SWITCH POSITION
Move the switch to the ON position located on the
control box.
Move in front of the item or make a loud sound (clap) to activate
the item. This mode will play the Reaper Band song and also
send a signal to a follower device/additional band member
when wired together on the control box.
Turn item to DEMO/OFF position when not in use.
BLUETOOTH® LEADER SWITCH POSITION
Move the switch to the BLUETOOTH® LEADER position on the
control box to play your own music/playlist. Locate the name
REAPER BAND on your phone/device and pair.
When your music is playing the item will automatically activate.
FOLLOWER SWITCH ONLY USED WITH ADDITIONAL ITEM.
FORGET/UNPAIR YOUR DEVICE TO CONNECT TO A NEW DEVICE.
LEADER SWITCH POSITION
OPTIONAL MULTIPLE ITEM BAND SETUP
1.
Insert the INPUT/OUTPUT WIRE into the OUTPUT jack.
2.
Move the switch into the BLUETOOTH® LEADER postion.
3.
Insert the INPUT/OUTPUT WIRE into the INPUT jack on the second
band member.
4.
Move the switch on the second band member to FOLLOWER.
FOLLOWER SWITCH POSITION
LEADER SWITCH POSITION
FOLLOWER SWITCH POSITION
LEADER
FOLLOWER
9
OPTIONAL DEMO AND EXTERNAL SPEAKER SET UP
OPTIONAL DEMO SET UP
FOOTPAD IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
1. Insert the cable from optional footpad into the
jack labeled DEMO JACK on the CONTROL BOX.
2. Place the switch in the DEMO (OFF) position to enable
DEMO activation.
3. Step on the footpad or external switch to activate the
scary sequence!
OPTIONAL EXTERNAL SPEAKER SET UP
EXTERNAL SPEAKER IS NOT INCLUDED.
MUST BE PURCHASED SEPARATELY.
1. Plug speaker cord into the jack labeled SPEAKER JACK
located on the CONTROL BOX.
2. Use volume knob on external speaker to control volume levels.
CARE AND MAINTENANCE
• STORE IN A COOL AND DRY ENVIRONMENT.
• INTENDED FOR INDOOR USE ONLY.
• SURFACE WASHABLE ONLY. DO NOT USE ANY HARSH OR ABRASIVE CLEANING AGENTS.
• REMOVE BATTERIES WHEN STORING ITEM FOR LONG PERIOD OF TIME.
• DESIGNED FOR SEASONAL OPERATION ONLY.
• NOT INTENDED FOR CONSTANT OR LONG-TERM USE.
• PROPER STORAGE AND USE ARE ESSENTIAL TO THIS ITEM'S LONGEVITY.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
Item will not
• 6V 2A adapter is not plugged in.
activate.
• Batteries are not inserted
correctly.
You only hear
• Control Box wires to the Head &
item sound but no
Body are not connected correctly.
item activation.
You cannot connect to
• Prior device is still connected to
Bluetooth® on NEW
REAPER BAND Bluetooth®.
device.
Item has no sound
• Volume knob is turned all the
while operating.
way down.
CORRECTIVE ACTION
• Check 6V 2A adapter is plugged
in and securely inserted into the
control box.
• Install batteries with positive and
negative in the correct positions.
• Make sure the control box wires
labeled K, L, and M are
securely connected.
• Unpair/forget prior
Bluetooth® device.
• Adjust volume knob to
desired volume.
10
Publicidad
