Sylvania LC225SL9 Manual Del Usuario página 31

PC Settings
This function lets you adjust the PC screen position, clock and phase during
PC input.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "DETAIL", then press
[ENTER].
3
Use [Cursor K / L] to select "PC settings", then press
[ENTER].
4
Use [Cursor K / L] to select the setting you want to
adjust, then press [ENTER].
5
Detail
Detail
Closed Caption
V–chip
PC Settings
HDMI1 Audio Auto
PC Settings PC Settings
Auto Adjustment
Horizontal Position 0
Vertical Position 0
0
Clock
Phase 0
6
Adjust the setting.
Auto Adjustment
Use [Cursor K / L] to select "Adjust", then press
[ENTER].
• The horizontal / vertical position, clock and phase of
the PC screen are automatically adjusted.
Horizontal Position, Vertical Position
Use [Cursor s / B] to adjust.
Horizontal Position
H. Position 0 - +
Adjust Move Enter
ENTER
Vertical Position
V. Position 0 -
+
Adjust Move Enter
ENTER
Clock, Phase
Use [Cursor { / B] to adjust the "Clock" setting to
stabilize the PC screen and the "Phase" setting to
improve the clarity of the PC screen.
Clock
Clock 0
Adjust Move Enter
ENTER
Phase
Phase 0
Adjust Move
ENTER Enter
Press [SETUP] to exit.
Note:
• Adjust the "Phase" setting after the "Clock" setting has
been properly adjusted.
• You may not obtain an appropriate screen with auto
adjustment for some signals. In this case, adjust the
settings manually.
• The limit value of the horizontal / vertical position differs
depending on PC input signal.
Auto Adjustment Auto Adjustment
This function automatically Cancel
adjusts the position, clock and
Adjust
phase of the picture element.
Cursor s Cursor B
to move PC to move PC
screen left screen right
to move PC to move PC
screen down screen up
Cursor s Cursor B
to decrease to increase
setting value setting value
31
EN