Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
No:
Button:
Description
3
Door lock Opens the door lock
4
Gate
Opens the gate
opener
5
Settings
This menu contains settings for:
•
Brightness
•
Color saturation
•
Contrast
•
Volume
•
Doorbell melodies
•
Door lock time
6
Close
Turns the monitor in stand-by mode
Table 1: Buttons and functions
5
Settings menu
Touch the settings icon on the home screen to enter the settings
menu.
Use the arrows to adjust the settings.
No:
Button:
Description
1
Brightness Use to adjust the brightness of the screen
2
Contrast
Use to adjust the contrast on the screen
3
Color
Use to adjust the colors
4
Volume
Use to adjust the volume of the ring tone
5
Set ring
Use to change ring tone
tone
8
6
Door lock
Use to set the door lock to close after 1 or 4
seconds
7
Exit
Use to exit the settings menu
6
Frequently asked questions
Problem
•
The indoor unit does not
switch on.
•
The ring tone volume is too
low.
•
I connected the indoor unit to
a lock but it does not work.
•
I hear interference on the line. •
Solution
•
Make sure that the monitor is
connected to the power
source.
•
Make sure the adapter plug is
properly pushed in to the
power outlet.
•
Perhaps you extended the
cable. Extending the cable
can reduce the volume due to
being too long or too thin.
•
Check if the lock is connected
properly and that a suitable
lock with an external power
source is used.
Move other electronics away
from the unit to minimize
interference.
•
Perhaps the cable is too long
or the wire too thin.
Publicidad
