Acova Fassane Neo 2 Manual De Instrucciones página 6

1.2 Positioning the appliance
To get the most out of your appliance and enjoy the highest standards of comfort,
we recommend that you install the appliance near places of high heat loss
(windows, doors, etc.) wherever possible.
You will find a complete set of assembly instructions in your appliance's box.
1.3 Connecting the appliance
The technical specifications of your appliance are shown on the name plate, which
is located on the side of the appliance towards the bottom. Please take note of
these before installing the appliance.
EN
When connecting the appliance to the mains, you must ensure that:
- voltage and power are as specified on the nameplate
- standard colour coding is used: brown = live, blue or grey = neutral,
green/yellow = earth (only for a Class 1 product)
N (blue or grey)
L (brown)
Earth (green/yellow)
10
IP: level of protection against ingress of water
230 V ~ xxx W: voltage and power required for
installation
Appliance reference number
Class 1 (no icon) or Class 2: (double insulated
product), varies by model
OF: serial number
Neutral
Live
40005954
2 Using your appliance
2.1 The radiator functions
The built-in control panel (see opposite) has the following functions:
Turn the forced convection function ON/OFF. Press the ON/OFF button (2) to
enable (the appliance then emits an audible signal) or disable (the appliance
then emits two audible signals) the fans. The green LED (1) is illuminated when
the fans are switched on.
Select fan speed (LEDs, 4). Press the button (3) repeatedly to select:
- Level 1: low speed (the left-hand LED lights up)
- Level 2: medium speed (the middle LED lights up)
- Level 3: high speed (the right-hand LED lights up). The fans will start at high
speed (boost) and revert to level 1 automatically after one hour.
NOTE each time the required room temperature is reached, your water supply (boiler
or heat pump) will stop supplying hot/cold water to your appliance. To save energy,
the sensors in your appliance will detect this and switch the fans off automatically,
whatever fan speed you have selected (see appendix for more information about fan
operation logic).
40005954
EN
11