Descargar Imprimir esta página

Philips NORELCO OneBlade QP6530 Manual Del Usuario página 4

Ocultar thumbs Ver también para NORELCO OneBlade QP6530:

Publicidad

Idiomas disponibles

Idiomas disponibles

product from the outlet, the battery charge
indicator switches off automatically.
Running time
When the product is fully charged, it has a
cordless running time up to 90 minutes.
Using the product
Note: This product is for cordless use only.
- Use this product for its intended household
use as described in this manual.
- For hygienic reasons, the product should
only be used by one person.
Switching the product on and off
1 Press the on/off button once to switch the
product on or off (Fig. 5).
- For hygienic reasons, only use the body
blade for trimming and shaving your body.
- For body trimming and shaving, make sure
the hair is clean and dry as wet hair tends to
stick to the body.
- When shaving sensitive areas, always use
the skin guard.
- Since all hairs do not grow in the same
direction, you may want to try different
trimming directions (i.e. upwards,
downwards, or across). Practice is best for
optimum results.
- For the best result, move the product
against the grain.
- Make long strokes while pressing lightly.
- Use the product dry or wet with gel or
foam, even in the shower.
- Shaving a clean body gives the best results.
Shaving without skin guard
The body blade without the skin guard allows
you to shave hair on your body below the
neckline (for example the chest).
1 Switch on the product (Fig. 5).
2 Place the blade on the skin and move the
product against the grain in long strokes
while pressing lightly. Stretch the skin with
your free hand.
Note: Make sure you hold the surface of the
blade flat against your skin (Fig. 6).
3 Switch off and clean the product after each
use (see 'Cleaning').
Shaving with skin guard
For optimal performance, use the skin guard
only on sensitive areas (for example the groin
and armpits).
1 Hold the skin guard on both sides and press
it onto the blade (Fig. 7).
2 Switch on the product (Fig. 5).
3 Place the skin guard onto the skin and
stretch the skin with your free hand. Move
the product upwards slowly, against the
grain.
- When using the product on your
armpits, raise your arm and put your
hand on the back of your head to stretch
the skin (Fig. 8).
- Regularly remove cut hair from the
guard. If a lot of hair has accumulated in
the guard, remove it from the product
and blow and/or shake out the hairs.
4 Switch off and clean the product after each
use.
5 To remove the skin guard, put one finger
under the edge of the guard and press on
the blade with your thumb (Fig. 9).
Trimming with body comb
The 1/8 inch (3 mm) body comb allows you to
trim hair on your body below the neckline (for
example chest, armpits, groin).
1 Hold the body comb on both sides and
press onto the blade (Fig. 10).
2 Switch the product on.
3 Place the comb onto the skin and stretch
the skin with your free hand. Move the
product upwards slowly, against the grain
(Fig. 11).
- Make sure that the flat part of the comb
is always in full contact with the skin to
obtain an even trimming result.
- When you use the product on your
armpits, raise your arm and put your
hand on the back of your head to stretch
the skin.
- Regularly remove cut hair from the
guard. If a lot of hair has accumulated in
the guard, remove it from the product
and blow and/or shake out the hairs.
4 Switch off and clean the product after each
use (see 'Cleaning').

Publicidad

loading