Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7. Insert the Universal Wall Clip (EE) into both
sides of the Vertical Standard (A) near its center
point. Once inserted push clips up and mark the
hardware hole locations.
NOTE:
You will NOT be able to install a shelf or clothing
rod where the Universal Wall Clip is located, so
please plan accordingly.
Hardware Used (Pack B)
EE
Universal Wall
Clip
NOTE:
Ensure Universal Wall Clip is installed in upward
direction for maximum support.
8. Remove Universal Wall Clip (EE) and using
5/16" drill bit, pre-drill marked hole locations into
drywall. Do not drill through the metal brackets.
Hardware Used (Pack B)
EE
Universal Wall
Clip
If you are unsure if a stud is located
PRO TIP
behind markings, use 1/8" drill bit to
drill all holes. If no stud is present,
then use 5/16" drill bit to make holes
larger for drywall anchors.
7
EE
x 2
25"
8
x 2
9
2x
EE
Publicidad
