Publicidad
Idiomas disponibles
Idiomas disponibles
Caution: Do not brew coffee while the coffeemaker lid is open.
•
Once brewing cycle is complete, place carafe on warming plate between servings to keep
it hot.
•
Coffeemaker will automatically turn off after 40 minutes.
Caution: If the brew basket overflows or fails to empty into the carafe, do not open the brew basket.
Unplug the coffeemaker and wait for the contents to cool before handling.
Brewing Coffee Later
•
Follow the same steps as "Water and Coffee" instructions.
•
To set the desired auto brew start time, first press the PROG button.
•
You can set the time you want coffee to begin brewing by using the HOUR and MIN buttons.
Following the same directions for "Setting the Clock".
•
After setting brew time, a green light will flash, and the word" AUTO" will show in the
LCD screen.
•
Your coffee maker will automatically begin brewing at the pre-set time. When the brew cycle
begins, the red light will flash to indicate the coffee maker is in operation.
•
Press the PROG button for about 3 second to cancel the Pre-set Mode.
BOLD Function
•
This function is to lengthen the brewing time in order to make stronger tasting coffee.
•
Press the "ON/OFF" button, then press the "BOLD" button.
•
You will notice an indicator LED light over the "BOLD" button that will turn green.
Note: This function will work immediately.
Note: You may press the "BOLD" button during normal brewing to shift over to this function.
Pause and Serve Function
•
This function allows you to pour a cup of coffee from the carafe while the coffee is brewing.
When the carafe is removed, the brewing process is paused. Just place the carafe on
the warming plate again and the brewing will resume.
10
CAFETERA DE 12 TAZAS PROGRAMABLE
MANUAL DE INSTRUCCIONES
Publicidad
