Publicidad
Idiomas disponibles
Idiomas disponibles
PCB will analyze the data if it is in line with the setting parameter. And it
will last for 31 seconds from 1 to 31.
F. If the data sample recorded is successful, it will display P (Pass). If not,
it will display "F" (Fail). In case of displaying "F", pls check if the water
supply or the gas supply is stable and repeat the sampling process again
until the final result displays "P". After successfully sampling showing "P",
press "
" and return to "5E".
G. Press "
" and adjust the code to "QU". Then press "
the mode and then exit.
Minus
Plus
Warning: The operation must be done by professional
technicians.
ON/OFF
" to save
Publicidad
