Publicidad
Idiomas disponibles
Idiomas disponibles
▪
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4
Power tool use and care
▪
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
▪
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
▪
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
▪
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
▪
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
▪
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
▪
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5
Service
▪
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6
SAFETY INFORMATION FOR SCARIFIERS
▪
Read the instructions carefully to ensure safe operation of the product.
▪
Before beginning work, check the area and remove all objects that may be caught up and
flung by the product.
▪
Keep the power cable away from the knives. The knives can damage the cable and result
in contact with activated parts.
▪
Press the operating lever with caution. Ensure you are standing at an adequate distance
from the working tool.
▪
Do not start the motor when standing in front of the ejection channel.
▪
Never place your hands or feet on or under rotating parts. Always maintain a safe distance
from the ejection opening.
▪
Remember that the product operator is responsible for accidents or risks to other persons
or their property.
▪
Only operate the scarifier at walking speed.
▪
Work only when light and visibility are good.
▪
Avoid using the product on wet grass. Exercise extreme caution when using on wet grass
so as to avoid slipping.
▪
Ensure that there are no other persons or animals close to the working area.
▪
Do not touch the knives until the product has been disconnected from the mains and the
knives have come to a complete standstill.
▪
Always ensure stability on slopes.
▪
Always work across slopes, never upwards or downwards.
▪
Never work on extremely steep slopes.
▪
Be vigilant when reversing or pulling the product.
▪
Be especially vigilant when changing direction on slopes.
Copyright © 2024 VARO
POWXG75160
P a g e
| 6
EN
www.varo.com
Publicidad
