Publicidad
Idiomas disponibles
Idiomas disponibles
PAIR DEVICE
Enable Bluetooth
7.
Go to Settings on the phone or
tablet, then tap Bluetooth.
Log into Stride Studio app
8.
Launch the Stride Studio app and log
in. The app will prompt you to allow it
access to Bluetooth. You must grant
it access. You will land on the "Get
Started" screen. Select "Next" to pair
the Icon knee.
"Demo" mode allows you to view the
settings without pairing to a knee.
The app will prompt you to press
the pairing (power) button on the
back of the knee.
Note: Phone or tablet must be
closer than 33 feet (10 meters) of
the Icon knee.
Begin Bluetooth
9.
Pairing
The knee must be paired to the
Stride Studio app when it is used
for the first time. Locate the serial
number of the knee in the app and
select it.
Note: The knee will be identified by
the Serial Number, which is located
inside of the frame, on the right side.
At this time, the LED turns blue.
Press the power button for 1 second
and the app will request to be paired
with your device.
Publicidad
