Publicidad
Idiomas disponibles
Idiomas disponibles
Supplied Hardware for Step 6A
For wooden table furniture/wood stud installation.
Screw M5X60mm
Z1
x2
Secure The Safety Straps With TV Stand Against The Wall
Note:
For the safest possible installation, we recommend using the included safety
straps. By doing so, you will greatly reduce the possibility of a TV Tip Over.
For wooden table furniture installation, follow STEP 6A
For wood stud installation, follow STEP 6B
For solid concrete or concrete blocy installation, follow
STEP 6C
Step 6A
For Wooden Table furniture Installation
●
DO NOT USE ANCHOR [Z4] FOR THIS STEP!
X
Note: It is necessary to predrill a pilot hole to avoid splitting the
wood. Being careful not to damage your furniture.
Caution: The mounting surface must be thicker than 1 in. (25mm).
It is reccommended that
the safety straps be
mounted at least 12" apart.
Screw M5X25mm
Z2
x4
Pencil
Phillips Screwdriver
(Not lncluded)
13
M5 Washer(BK)
Z3
1/8 in (3mm)
X
Z2
(Not lncluded)
x2
1 in (25mm)
1/8 in (3mm)
Publicidad
