ISY IAC 3000 Manual Del Usuario página 4

G User Manual
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for
future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important
notes.
2. Package Contents
Power supply unit
• Power cable
• 10 Ultrabook/Notebook adapter plugs
• These operating instructions
3. Safety Notes
• This product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating, and only use
it in dry locations.
• Do not drop the product and do not expose it to any major shocks.
• As with all electrical devices, this device should be kept out of the
reach of children.
• Only connect the product to the specified voltage.
• Do not operate the product outside the power limits given in the
specifications.
• Connect the product only to a socket that has been approved for the
device. The electrical socket must always be easily accessible.
• Disconnect the product from the network using the power button – if
this is not available, unplug the power cord from the socket.
• Always pull directly on the plug when disconnecting the cable, never
on the cable itself.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not use the product if the adapter, connection cable or power
cable is damaged.
• Keep children away from the packaging material as there is a risk of
suffocation.
• Do not modify the device in any way. Doing so voids the warranty.
4. Operation
Warning
• Ensure that your ultrabook/notebook requires a supply voltage of
19 volts (+/- 1 V); otherwise your device may be damaged.
• The specified supply voltage can be found on the original power
supply unit or in the user manual of your notebook/ultrabook. If
you cannot find the specification, do not connect your ultrabook/
notebook and contact the manufacturer.
• Ensure that the total power consumption of the ultrabook/
notebook does not exceed the power supply unit's rated output
capacity of 90 W.
2
• The adaptor plugs included with the power supply unit cover most
common ultrabooks/notebooks from major manufacturers.
• Please select the correct adapter using the plug on the original power
supply unit.
• Test the selected adapter in the socket of the ultrabook/notebook
while the ultrabook/notebook is switched off and the power supply
unit is NOT connected. The plug should slide into the socket easily
and fit securely without too much play.
• Connect the correct adapter to the DC connection line of the power
supply unit. This connection is protected against polarity reversal; i.e.,
the adapter fits easily onto the connection cable in one position only.
• First connect the power supply unit to the ultrabook/notebook. Then
plug the electrical plug of the power supply cord into the electrical
socket.
• Do not use force under any circumstances. This may damage the
power socket of the ultrabook/notebook or the adapter.
Warning
• Never attempt to forcibly connect the adapter plug in the wrong
position, as this can lead to the polarity being reversed.
• If the polarity is reversed, the ultrabook/notebook may be
damaged.
Note
The USB port on the power supply unit can be used to charge or
operate USB devices such as tablet PCs, smartphones, MP3 players,
navigation devices, etc. The maximum output current of the USB
port is 2100 mA.
5. Care and Maintenance
• Only clean this product with a slightly damp, lint-free cloth and do not
use aggressive cleaning agents.
• Make sure that water does not get into the product.
6. Technical Data
Mains voltage: AC 100 V – 240 V, 50 Hz/60 Hz
Rated output capacity: 90 W
Output voltage: 19 V
USB: 5 V, 2100 mA
Ambient temperature during operation: 0 °C – 40 °C
7. Disclaimer
Imtron GmbH accepts no liability for any losses or damages, resulting
from improper installation, assembly and usage of the product or
disregard of the operating instructions and/or the safety notes and
warnings.