Publicidad
Idiomas disponibles
Idiomas disponibles
Preparing the appliance before use
Fig. 11
mín. 0,5 m.
máx. 3°
Important
• Remember to unwind the hose loops
first! (see Important Information)
• Make sure that the appliance is
hanging horizontal, otherwise the
lower tray may shed water. To do
this, use the lower spacer bar, see A,
Fig 2.
• For safety reasons, do not simply
hang the outdoor unit from the hose
which joins it to the interior.
• Do not mount the outdoor unit
higher than permitted or at a level
lower than the indoor unit. Maintain
minimum distances with regard
adjacent objects. See figs 9, 11 and
12.
• Do not crush or twist the flexible
hose which joins the two appliances.
All manuals and user guides at all-guides.com
mín. 0,5 m.
Fig. 12
44
Joining the indoor and outdoor
units
The two units are joined by a flexible hose.
When you wish to use the appliance, you
can choose to:
• Pass the hose through a door or window
left ajar, Fig. 13.
• Make a hole measuring 9 cm in diameter
in the wall and fit the Wall access
accessories on the inside and the outside
of the wall. Fig. 14.
• If the accessories are too long, you can
cut one of them in order to adapt the
assembly to the thickness of the wall,
Fig. 15.
Fig. 13
Fig. 14
Fig. 15
Publicidad
