Unpacking; Intended Use - IKA R 2722 Instrucciones De Uso

Unpacking

• Please unpack the device carefully
• In the case of any damage a detailed report must be
sent immediately (post, rail or forwarder).
NOTICE
Use
The R 2722 H-stand and the R 2723 telescopic stand
are suitable for larger, heavier devices and attach-
ments that require absolute stability.
The R 2723 telescopic stand should only be used to hold,
raise and lower stirrers and dispersers. With the pneumat-
ic spring stand rod, instruments and attachments can be
raised and lowered smoothly and without difficulty.
Unpacking

Intended Use

The adjustment screw (3)
can be used to compensate
for unevenness on the set-
up plate. Use the lock nut to
lock the adjustment screw.
Scope of delivery R 2722
• R 2722 H-Stand
• Opertating instruction
Scope of delivery R 2723
• R 2723 Telescopic stand
• Opertating instruction
Area of use
- Laboratories
The safety of the user cannot be ensured:
• if the stand is used in conjunctions with accessories
not made or recommended by the manufacturer
• if the stand is not used for the intended purpose as
specified by the manufacturer.
The stand should only be used if it is in perfect working
condition. The correct functioning of the stand must be
checked at regular intervals.
- Manufacturing plants
5