BINELLI CLASICA N02 Manual Del Usuario página 10

STEP 8: Place the ring + cooker hood. Position the ring on the sides (fit the slot at the bottom over
the sides). Position the lower part of the cooker hood over the internal ring housing. Place the top of the
cooker hood.
FRONTAL VIEW
STEP 9 : Chimney extension + Chimney hood . Place the chimney extension following the line of the
upper mouth of the cooker hood and center the chimney hood over the mouth of the chimney extension.
FRONTAL VIEW
STEP 10 : Sealing and touch-ups. Once the assembly of the grill is complete and before placing the
remaining pieces of hardware, seal the meeting points between the concrete pieces. In the area where
the fire is going to be lit, if considered necessary, it can be sealed from the inside (hood with ring and
external sides) with acrylic sealant or brick gluing mixture (Dun Dun or Weber type).
Internal area to be
sealed: ring, back,
internal and
external sides.
N02
Cooker hood top
Cooker hood bottom
Ring
Chimney extension
MOUTH GRILLING VIEW
FRONTAL VIEW
Chimney hood
FRONTAL VIEW
www.parrillasbinelli.com /parrillasbinelli