Publicidad
Idiomas disponibles
Idiomas disponibles
z Charge portable jump starter with
power bank
„
Connect the USB-C cable
and an appropriate USB-A socket or an appropriate USB
4
network adapter (working output voltage U
PLEASE NOTE: USB AC adapter not included in the scope
of delivery.
PLEASE NOTE: An undervoltage protection circuit is
installed in the portable jump starter with power bank
protect the device from damage. This prevents a deep discharge
of the portable jump starter with power bank
cally switches the device off once the rechargeable battery pack
is fully discharged. Shortly before the undervoltage protection
circuit is activated, the last blue indicator light
flash. As soon as the undervoltage protection circuit is activated,
the last blue indicator light
be delivered. Please charge the portable jump starter with power
bank
again.
1
z Using the jumpstart feature
Step
1. Connect the
jump lead
of
10
the portable jump
starter with
power bank
to
1
the jumpstart
outlet
of the
9
portable jump
starter with
power bank
.
1
16
flashes and power will no longer
8
LEDs
Red Error LED
on
13
the jump lead
is
10
permanently lit. A
short alarm will
sound once a
second.
Green Start LED
12
flashes.
GB/IE/NI/CY/MT
with the charging port (USB-C)
1
Meaning / Error
The voltage
determined in the
portable jump
starter with power
bank
is not
1
enough to start the
car.
The portable jump
starter with power
bank
is ready.
1
5 V
).
out,max
to
1
and automati-
will start to
8
Solution
Charge the
portable
jump starter
with power
bank
Carry on
with step 2
17
.
1
Publicidad
