cecotec Bamba SkinCare IPL Manual De Instrucciones página 26

ENGLISH
The epilator does not The device is not properly
emit pulsed light when placed on the skin.
the pulsed-light emission
button is pressed.
The Cooling Function is
enabled and the display
shows "ICE".
The epilator or adapter It is normal for the device or
becomes hot during use. adapter to slightly heat up
during use.
Fan airflow is obstructed.
The fan does not work.
The epilator produces a The light exit window is dirty.
strange smell.
You have not properly
removed the hair on the area
to be treated. Hair can burn
and cause odour.
The device makes noise. The fan emits a noise similar
to that of a hair dryer during
use.
When emitting light pulses,
the device emits a soft
clicking sound.
50
BAMBA SKINCARE IPL GUN
Place the device at a 90°
angle on the skin. Make sure
the light indicator is flashing
white.
Disable the Cooling Function.
Use the epilator in a cool
environment or allow it to
cool down before further use.
Make sure that nothing is
obstructing the airflow.
If the fan does not work,
contact Cecotec Customer
Service.
Clean the light exit window.
Shave the hair before using
the epilator.
These noises are normal.
You notice discomfort You have used too high an
during treatment, or the intensity level.
subsequent skin reaction
lasts longer than normal.
You have used the epilator on
a contraindicated area.
The UV filter of the light exit
window is broken.
Epilation results are You have used too low an
unsatisfactory. intensity level.
You did not apply the light
pulse to an area adjacent to
the previously treated area.
The colour of your hair is not
suitable for use of the device.
You have not followed the
recommended frequency of
use.
Your body responds slower
to IPL epilation.
7. TECHNICAL SPECIFICATIONS
Product name: Bamba SkinCare IPL Gun / S/ T/ M/ X
Product reference: 04430/ 04426/ 04427/ 04428/ 04429
Used technology: Intense Pulsed Light
ENGLISH
Use an appropriate intensity
level for each area to be
treated. Always perform a
skin test prior to treatment on
each area.
Do not use the device on
the areas specified under
"Contraindications and
precautions".
If the UV filter is broken, stop
using the device and contact
Cecotec Customer Service.
Use an appropriate intensity
level for each area to be
treated
Apply each light pulse next
to the previous one without
overlapping.
Pulsed-light treatment is not
effective on light, blonde,
grey, red, or white hair.
Follow the instructions on
frequency of use. You can
advance the sessions, but do
not exceed the recommended
time between one session
and the next.
Continue treatment for at
least 6 months to effectively
reduce hair growth.
51
BAMBA SKINCARE IPL GUN