Forza FIA-WFM2GR Manual Del Usuario página 3

3. Wi-Fi module installation
Please follow the steps below to install the Wi-Fi module:
Step 1: The module contains four strong magnetics dots in its back side to be easily placed on the side of the inverter.
Step 2: Please use the provided RS-232 communication cable to connect the Wi-Fi module to an inverter, as shown below.
4. WatchPower application
4.1 How to download and install the app*
Please scan the following QR code with your smart phone and download the WatchPower app.
Android
Also, you can find the "WatchPower" application in the Apple
iOS
Store or "WatchPower Wi-Fi" in Google
® ®
*This application works with iOS 9.0 and higher, or
Android 5.0 and higher.
4
4.2 Initial setup
Step 1: Registration at first time
After installation, tap on the WatchPower icon
Then, press "Register" to get to the "User Registration" page. Fill in all required information and scan the Wi-Fi module PN
by tapping on the
"Register" button.
Then, a "Registration success" window will pop up. Tap "Go now" to continue setting up your local Wi-Fi network
connection.
Step 2: Local Wi-Fi module configuration
Next, you'll find the "Wi-Fi Config" page. You'll see the steps to follow under "How to connect?" Follow them to connect to
the Wi-Fi network.
Play Store.
to access the app on your mobile screen.
icon. Otherwise, you can simply enter the Wi-Fi Module PN directly and then, tap on the
5