Forza FIA-WFM2GR Manual Del Usuario página 7

Device alarm and name modification
In this page, tap the bell icon on the top right corner to enter the device alarm page. Then, you can review alarm history and
detailed information. Tap the pencil icon on the top right corner, and a blank input box will pop out. Then, you can edit the
name for your device and tap "Confirm" to complete the modification.
Device information data
By swiping the screen left, you can check up basic Information, product Information, rated information, history, and Wi-Fi
module Information.
Swipe left
12
• Basic Information displays basic information of the inverter, including AC voltage, AC frequency, PV input voltage,
battery voltage, battery capacity, charging current, output voltage, output frequency, output apparent power, output
active power and load percent. Please slide up to see more basic information.
• Production information displays inverter model type, main CPU version, Bluetooth CPU version and secondary
CPU version.
• Rated Information displays information of nominal AC voltage, nominal AC current, rated battery voltage, nominal
output voltage, nominal output frequency, nominal output current, nominal output apparent power and nominal
output active power.
• History displays the unit data record and current settings.
• Wi-Fi Module Information displays the Wi-Fi module PN, status and firmware version.
Parameter settings
Here you can activate some features and set up parameters for inverters. Please note that the list in the diagram below may
differ from the models of monitored inverters. For instructional purposes, here we briefly highlight some of the listed items:
output setting, battery parameter setting, enable/disable items, restore to the defaults, time zone setting, Wi-Fi module
configuration.
There are three ways to modify setting and they vary according to each parameter.
a) Listing options to change values by tapping one of them.
b) Activate/Shut down functions by clicking "Enable" or "Disable" button.
c) Changing values by clicking arrows or entering the numbers directly in the column.
d) Each function setting is saved by clicking the "Set" button.
Please refer to the parameter setting list below for an overall description. Note that the available parameters may vary
depending on the inverter model. Please always see the original product manual for detailed setting instructions.
13