Configuring Additional Pool Profiles - Maytronics WAVE 300 XL Instrucciones De Uso

In order to return to English from any other language, press and hold the "menu" button for
TIP
3-4 seconds, on the Wave screen.

9. ConfiGurinG addiTionaL PooL ProfiLeS

The Dolphin Wave can be configured for 4
different pool profiles. The configured settings
are stored in the MMI's memory. This section
describes how to configure additional pool
settings.
To add a new pool configuration, proceed
as follows:
1. Go to the Wave screen. "Pool A" is
displayed as the currently defined setting
as shown in Figure 8.
2. From the Wave screen, press Pool A.
The Pool Profile screen opens (Figure 9).
Pool A
Pool B
Pool C
Pool D
Select
figure 9: Pool Profile screen
To go to a previously defined pool setting:
1. From the Wave screen, press the currently displayed pool setting at the right side of the screen
(see Figure 8) to open the Pool Profile screen.
2. Scroll to the required pool and press Select. The Wave screen is displayed with the chosen
pool setting.
Wave XL User Instructions
|
Select Pool
Exit
Menu Start
figure 8: Wave screen showing Pool a as default setting
3. To select a second pool profile, scroll down
to Pool B and press Select.
The Wave screen automatically displays
showing that Pool B is the currently defined
pool.
4. To configure Pools B, C and D, go to Step 1
of Starting a cleaning session, on page 5.
Pool A
9