Pleasant Hearth 230-168-10 Manual página 5

ASSEMBLY INSTRUCTIONS
4. Locate the Top Panel (A) and place it on a soft
surface to protect the finish. Insert four Cam
Bolts (AA) into the threaded holes in the bottom
of the Top Panel (A). Fully tighten the Cam Bolts
(AA) with a screwdriver. Set aside for step 6.
Locate the Base Panel (B) and place it on a soft
surface to protect the finish. Insert four Cam
Bolts (AA) into the threaded holes in the top of
the Base Panel (B). Fully tighten the Cam Bolts
(AA) with a screwdriver.
5. Install four Wood Dowels (CC) into the
unthreaded hole in the bottom of the Base
Panel (B). Align the unthreaded holes in the
Left and Right Inside Panels (F & H) with the
Wood Dowels (CC) in the base panel and push
the parts together. Attach the Left and Right
Inside Panels (F & H) by using four Cam Locks
(BB) as shown in the cam lock assembly guide.
Locate the six Legs (P) and screw them into the
threaded holes in the bottom of the Base Panel
(B).
6. Install four Wood Dowels (CC) into the
unthreaded hole in the bottom of the Top Panel
(A). Align the unthreaded holes in the Media
Partitions (J) with the Wood Dowels (CC) in
the Top Panel (A) and push the parts together.
Attach the Top Panel (A) by using four Cam
Locks (BB) as shown in the cam lock assembly
guide.
4
5
BB
CC
P
6
5
AA
A
AA
B
F
H
B
CC
BB
A