Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings, instruc-
WARNING
tions, illustrations and specifica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on
the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If dam-
aged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
2
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
BED REDEFINERS
• Before use, read this manual, and all manuals and
labels of this tool and its power head. Failure to
follow the warnings and instructions may result
in serious injury. Use tool only as described in
this manual. Use only attachments recommended
by MILWAUKEE.
• Always wear eye and hearing protection, and
protective clothing and footwear, according to
the operation being performed. Wear heavy, long
pants, long sleeves, boots, and gloves. Contain
long hair. Do not wear loose clothing or jewelry. Do
not wear short pants, sandals, or go barefoot.
• Keep bystanders at least 50' away during use.
Objects may be thrown or ricochet in all directions.
•This tool is for use in edging along hard surfaces,
such as sidewalks, driveways, flower beds, curbs,
and similar areas. Do not use the tool on or near
gravel surfaces.
• Know your environment. Be cautious around
uneven sidewalks and terrain, as well as other
hazardous conditions. Always push the tool
slowly over rough ground.
• Inspect the area before using the tool. Remove
all debris and hard objects such as rocks, glass,
wire, etc. that can ricochet, be thrown, or otherwise
cause injury or damage during operation.
•
Do not operate near electric
WARNING
power lines. The unit has not been
designed to provide protection from electric
shock in the event of contact with electric
power lines. Consult local regulations for safe
distances from electric power lines and ensure
that the operating position is safe and secure
before use.
• Do not use an attachment extension with this
tool attachment. The additional length will make
this attachment difficult to control and could
cause injury.
• Do not use the tool near anything that is burning or
smoking such as cigarettes, matches, or hot ashes.
•To reduce the risk of health hazards from vapors
or dust, do not use tool near tool toxic, carcino-
genic or other hazardous materials such as as-
bestos, arsenic, barium, beryllium, lead, pesticides
or other health endangering materials.
•Use care when using around decorative plants
and other obstacles. Accessories will cut/damage
many materials.
•Do not use brush cutting wheels, accessories,
or attachment other than those recommended
by MILWAUKEE. Serious injury or product damage
may occur.
• Do not operate the tool without the guard in
place. The guard must be attached properly
during use. Operating the tool without the guard
will cause serious injury.
• Do not use tool with a damaged head. Cracked
or broken pieces can be thrown.
•Do not operate the tool without the front handle in
place. The front handle must be attached properly
during use. Use both hands when operating the
tool, according to the attachment instructions.
Maintain a firm grip. Using one hand could cause
loss of control and result in serious injury.
•Keep face, hands and feet clear of moving parts at
all times. Moving parts can cause severe lacerations.
• Always keep your right hand on the rear handle
and your left hand on the front handle when the
blade is rotating.
•Brace for unexpected movement when contact
is made with a hard object. Loss of control could
result in serious injury.
• Thrown objects may ricochet off of hard surfaces,
such as walls, trees, and rocks and cause injury.
When possible, do trimming by hand in closed in areas.
• Carry the tool by the front handle to avoid accidental
starting. Proper handling of the tool will prevent injury.
• Always turn off the tool when transporting from
one location to another. Do not carry tool with
finger on the trigger. Accidental starting can cause
serious personal injury.
• Hold the tool motionless until the blade comes
to a complete stop. A coasting blade can cause
injury.
• Keep all parts of your body back and to the left
of the blade. Do not stand in line or to the right
of the blade.
• Inspect tool for damage if contact is made with
a hard object. If damaged, have the tool repaired
before use.
• Remove battery pack and follow all instructions
when clearing obstructions or jams.
3
Publicidad
