Publicidad
Idiomas disponibles
Idiomas disponibles
D1
E
HOW TO USE YOUR HEDGE TRIMMER (See Fig. D1,D2)
Allow the cutting blades to reach full speed before cutting. When operating, keep the cutting blades away
from people and objects such as walls, large stones, trees, vehicles, etc.
If the blade stalls, immediately stop the trimmer. Release the two Switch Levers (2 & 3 ) before attempting to
clear jammed debris from the cutting blades.
Do not attempt to cut stems that are too thick for the cutting blade.
TOP CUTTING
Use a wide sweeping motion (See Fig. D1). A slight downward tilt of the cutting blades in the direction of mo-
tion gives the best cutting results.
SIDE CUTTING
When trimming the sides of the hedge, begin at the bottom and cut upwards (See Fig. D2), tapering the hedge
inward at the top. This shape will expose more of the hedge, resulting in a more uniformed growth.
CLEANING
Disconnect the tool from power supply. Use a soft brush to remove debris from all air intakes and cutting blade.
Wipe the surface with a dry cloth.
D2
9
Publicidad
