Publicidad
Idiomas disponibles
Idiomas disponibles
2.6.2 Password
The default password is 000 and means that settings can be made without
entering the password.
If a password other than 000 is set, then the password must be entered to
make settings.
Button functions:
Change decimal place
Change Digit 0-9
Confirmation of Entry
Enter password:
1.
Turn off the station
2.
Press and hold the "▲" and "▼" buttons on the right side at the same
time and turn on the station.
3.
A short beep will sound and C will be displayed.
4.
Release the "▲" and "▼" buttons on the right side. The display shows: ---
5.
Enter and confirm your current password. After the current password
has been entered correctly, it will be displayed: -1-
6.
After confirmation, work can be done with the station.
Change password:
1.
Turn off the station
2.
Press and hold the "▲" and "▼" buttons on the right side at the same
time and turn on the station.
3.
A short beep will sound and C will be displayed.
4.
Release the "▲" and "▼" buttons on the right side. The display shows: ---
"▲" or "▼" on the right
Knob
"▲" and "▼" right, at the same time
6
USER MANUAL
Publicidad
