Donner HUSH-I PRO Manual De Usuario página 10

● DELAY Module
The DELAY module may be activated by rotating the "EDIT" button to Level 5. You may switch to
diverse effects by rotating the "SELECT" button. The factory settings include five delay effects:
Analog, Echo, Dual, Tremolo, and Lofi. The effect output values may be changed by regulating the
"Value" button.
Reset: Shortly press the Bluetooth button to restore the effect value to 50%.
● REVERB Module
The REVERB module may be activated by rotating the "EDIT" button to Level 6. You may switch to
diverse effects by rotating the "SELECT" button. The factory settings include five reverb effects:
Room, Hall, Spring, Cloud, and Shimmer. The effect output values may be changed by regulating the
"Value" button.
Reset: Shortly press the Bluetooth button to restore the effect value to 20%.
4. IR Module
The IR module may be activated by rotating the "EDIT" button to Level 7. The factory settings include
the simulations of multiple classic IR guitars (you may import external IR files as per your
preferences). The ratio of guitar dry signals to IR wet signals may be changed by regulating the
"Value" button. Therefore, you may create massive tones to improve the playability. 0% indicates all
wet signals, while 100% indicates all guitar dry signals.
Note: The specifications of external IR files are uncontrollable. After importing any external IR file,
the conditions such as overdrive/distortion/low voice/excessive voice/mute may occur. Your
discretion is advised.
Reset: Shortly press the Bluetooth button to restore the dry-wet ratio of IR signals to 50%.
5. EQ Module
The EQ module may be activated by rotating the "EDIT" button to Level 8. The module supports
5-band EQ regulation, and the EQ regulation module storage/change can be made as per
presettings.
Reset: Shortly press the Bluetooth button to restore the Gain values of all bands to 0.
6. TUNER Interface
The Tuner interface may be activated by rotating the "EDIT" button to Level 9, and you may return to
previous interface by rotating the button to any other level.
Tuning: The frequency of current Benchmark A can be set. The range (430-450 Hz) is 440Hz by
default. And the frequency can be regulated by rotating the "SELECT" button.
Reset: Shortly press the Bluetooth button to restore all tuning frequency to 440Hz.
Note: The Tuner mode supports Muted conditions only, and it does not support Bypass (voiced)
output conditions.
7