Descargar Imprimir esta página

GE RARWT1W Manual Del Propietario & Instrucciones De Instalación página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

Testing the Thermostat
Furnace Test
1. Toggle mode button until mode is active. Furnace mode
screen is displayed.
2. Adjust set temperature so it is 5 degrees above room
temperature. Within a few seconds, the furnace should initiate
its startup procedure.
3. Adjust the set temperature so it is 2 degrees below the
room temperature and the heat should turn off. Note:
Depending on the model of furnace used, there may be a
delay in engaging and disengaging the furnace.
49-5000400 Rev. 1
13

Publicidad

loading

Este manual también es adecuado para:

Rarwt1bRarmec1a