Gadnic BEB00049 Manual De Usuario página 38

◀
/

▶

7. Press
key
to
select
Hour,
Minute
setting; Press
and Minute.
8. Press the Return Key
8.7 ENERGY SAVING
This mode allows you to control the sound activation of your baby unit. If there is no sound
around the baby unit within 30 seconds, it will stop audio transmission and turn off the
screen of the parent unit. When the baby unit detects any sounds louder than the sensitivity
level, it will start transmitting the signal to the parent unit again and turn on the screen of the
parent unit. To change the ECO level, please follow the below instructions.
1. Press the MENU
2. Press the
◀
/
▶
/
▲
/
▼
key until the ECO
icon

key enter into sub-menu, then press
▲
/▼
key
to
select
desired
level.
3.
Press
4.
Press








key
to
confirm.
5.
Press









key
to
exit.

is Low sensitivity level, the baby have to make a lot of sound before the ECO
Note:
function is activated.
is Middle sensitivity level.
Note:
Note: is High sensitivity level, the baby don't have to make a lot of sound before the ECO
function is activated.
8.8 LANGUAGE SETTING
1. Press the MENU
2. Press the
◀
/

▶
/
▲
/
▼ keys until the
language icon








is
selected.
key to enter into sub-menu, then press ◀
/
▶
/
▲
/
▼ key to select the
3. Press
language you need.
4.
Press key
to
confirm.
5.
Press key
to
exit.









one time to exit sub-menu, and two times exit main menu.
key and the menu will pop up.
key and the menu will pop up.

▲
/
▼
key to set your desired hour
is selected.
ECO
38