Publicidad
people who want more.
Before reading the rest of this manual, it is recommended that users look at the Anduril UI diagram(s), which
should be provided along with the flashlight.
Button presses
Button presses are abbreviated using a simple notation:
- 1C: One click. Press and then quickly release the button.
- 1H: Hold. Press the button, but keep holding it.
- 2C: Two clicks. Press and release quickly, twice.
- 2H: Click, hold. Click two times, but hold the second press.
- 3C: Three clicks. Press and release quickly, three times.
- 3H: Click, click, hold. Click three times, but hold the final press.
The same pattern is used with higher numbers too. For example, 10C means ten clicks... and 10H means ten
clicks but hold the final press.
Simple UI Diagram
Simple UI
By default, the light uses a simple UI. This is useful if you lend the light to someone else, or if you just don't
want to bother with any crazy disco modes.
Simple UI has all the basic functions needed to work as a flashlight, but the minimum and maximum brightness
are limited to make it safer, and any complex or advanced functions are blocked.
Functions available in Simple UI include:
- 1C: On / off
- 1H: Ramp up (or down, if button was released less than a second ago)
- 2H: If light is on : ramp down
If light is off: momentary high mode
- 2C: Double click to go to / from highest safe level
- 3C: Toggle between SMOOTH RAMPING and STEPPED RAMPING (while light is on)
- 4C: Lockout mode.
Some other modes and functions are available too. When the light is off, these are the options:
- 3C: Battery check mode. (displays voltage once, then turns off)
Not everything is covered in the diagram, please read the text.
Publicidad
