Panasonic EY7880 Manual De Instrucciones página 10

• If the overheating protection feature
activates, allow the driver to cool
thoroughly (at least 0 minutes).
The driver is ready for use when the
overheat warning lamp goes out.
• Avoid using the driver in a way that
causes the overheating protection
feature to activate repeatedly.
NOTE:
• In summer or in other situations
where the temperature is high, the
overheating protection feature may
activate and prevent continual use.
(3) LED light
Pressing the
ton tog gles the LED
light on and off.
The light illuminates
with very low cur-
rent, and it does not
adversely affect the
performance of the driver during use
or its battery capacity.
CAUTION:
• The built-in LED light is designed to illu-
minate the small work area temporarily.
• Do not use it as a substitute for a
regular flashlight, since it does not
have enough brightness.
This product has the built-in LED light.
This product is classified into "Class 1
LED Product" to IEC (EN) 60825-1 : 2001
Class 1 LED Product
Caution : DO NOT STARE INTO BEAM.
Use of controls or adjustments or performance
of procedures other than those specifi ed herein
may result in hazardous radiation exposure.
Battery pack
For Appropriate Use of Bat tery Pack
Li­ion Battery Pack
• For optimum battery life, store the
Li-ion battery pack following use
without charging it.
• When battery pack is not in use, keep it
away from other metal objects like: paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a con-
nection from one terminal to another.
Shorting the battery terminals togeth-
er may cause sparks, burns or a fire.
• When operating the battery pack, make
sure the work place is well ventilated.
• When the battery pack is removed
from the main body of the tool, re-
place the battery pack cover imme-
diately in order to prevent dust or dirt
from contaminating the battery termi-
nals and causing a short circuit.
Battery Pack Life
The rechargeable batteries have a lim-
but-
ited life. If the operation time becomes
extremely short after recharging, re-
place the battery pack with a new one.
Battery Recycling
ATTENTION:
FOR Li­ion Battery Pack
A Li-ion battery that is recyclable
powers the product you have pur-
chased. Please call 1-800-8-BAT-
TERY for information on how to re-
cycle this battery.
Battery charger
Charging
Cautions
• Make sure the terminals of the bat-
tery charger are not contaminated
with liquid, grease or other substanc-
es before charging the battery pack.
If you notice the terminals of the bat-
tery charger contaminated, be sure
to wipe or take them off before use.
The life of the battery pack may ad-
versely be affected when the ter-
minals are clogged with the dust or
dirt which becomes solid with liquid
or grease.
• If the temperature of the battery
pack falls approximately below -10°C
(14°F), charging will automatically
stop to prevent degradation of battery.
- 10 -