Publicidad
Enlaces rápidos
Date
29 July 2022
File Name
HBP4783_Dymension_QSG_DM60_NA_MP_2022-07-29.pdf
Scale
Full Size
Drawn By
ML
Color
2 color (Black + Pantone 299C (Dymension blue))
Paper
Tortilla smooth/80T (uncoated stock) (98 opacity, 10.6 caliper, 150 smoothness) Offset
Process
Notes
Offset lithography
Artwork
Digital file; A5; 148 mm x 210 mm
Binding
Staple binding
Revision
Date
Description
A
10-28-2021
Creation of document
B
11-18-2021
DPP document
C
04-21-2022
LPP document
D
04-26-2022
LPP document (2)
E
07-29-2022
MP document
TITLE BLOCK
DOES NOT PRINT
Publicidad
Manuales relacionados para Definitive Technology DM60
Resumen de contenidos para Definitive Technology DM60
- Página 1 Date 29 July 2022 File Name HBP4783_Dymension_QSG_DM60_NA_MP_2022-07-29.pdf Scale Full Size Drawn By Color 2 color (Black + Pantone 299C (Dymension blue)) Paper Tortilla smooth/80T (uncoated stock) (98 opacity, 10.6 caliper, 150 smoothness) Offset Process Notes Offset lithography Artwork Digital file; A5; 148 mm x 210 mm Binding Staple binding TITLE BLOCK...
- Página 2 QUICK START GUIDE GUIDE DE DÉMARRAGE RAPIDE GUÍA DE INICIO RÁPIDO DM60 ™...
- Página 3 Unpack Check that the items shown are included in the box. Compruebe que la caja incluye los elementos mostrados. Vérifiez que les éléments indiqués sont inclus dans la boîte.
- Página 4 Place >6” (15 cm) Keep your speakers at least 6 in (15 cm) away from back and side walls. The ideal speaker placement is dependent on environment and personal prefer- ence. Visit the online user manual for placement suggestions. Maintenez vos enceintes à une distance d’au moins 15 cm des murs arrière et latéraux.
- Página 5 Connect Speaker Wires to the Binding Posts 1. Strip about 3/8 in (10 mm) of insulation from two speaker wires. 2. Unscrew the binding posts. 3. Connect the wires to the binding posts. 4. Tighten the binding posts until secure. 1.
- Página 6 Connect the Speaker Wires to Your Amplifier Connect the other ends of your speaker wires to your amplifier. Ensure that the speaker is always connected to the receiver or amplifier + to + and – to –. Connectez les autres extrémités des câbles de votre enceinte à votre amplifi- cateur.
- Página 7 Connect to Power Plug the power cable into the tower speaker then a wall outlet. Branchez le câble d’alimentation sur le haut-parleur tour, puis sur une prise murale. Enchufe el cable de alimentación en el altavoz de la torre y luego en un tomacorriente de pared.
- Página 8 Listen to Your Speakers After you connect the speakers to your amplifier, listen to familiar music or watch TV to test the speaker sound and volume. Adjust the bass level and your amplifier settings as needed. See the next page for help adjusting the rear speaker effect.
- Página 9 Full Rear Volume (Default) Half Rear Volume definitivetechnology.com/DM60 The rear speakers are set to 0 dB by default. If your speakers are close to a back wall or if there is too much spatial effect, move the switch to the -6 dB position.
- Página 10 Need More Help? definitivetechnology.com/DM60 Scan the QR code to download the user manual, watch a setup video, see frequently asked questions, or get troubleshooting assistance. Besoin d’aide ? Scannez le code QR pour télécharger le manuel d’utilisation, regardez la vidéo d’installation, consultez les questions fréquemment posées ou obtenez de l’aide pour le dépannage.
- Página 13 Share Photos | Partager Des Photos | Compartir Fotos #Dymension Sound United, LLC EU Contact: UK Importer: 5541 Fermi Court Sound United Europe, D&M Audiovisual Ltd. Carlsbad, CA 92008 A division of D&M Europe B.V. Dale Road, Worthing, U.S.A Beemdstraat 11, 5653 MA West Sussex Eindhoven, The Netherlands BN11 2BH United...